Transparent, cloudy colorless to pale yellow cyanoacrylate/acrylic hybrid gel adhesive that provides a fast fixture at room temperature.
LOCTITE® HY 4070 is a 2-part, transparent, cloudy colorless to pale yellow cyanoacrylate/acrylic hybrid gel adhesive that provides a fast fixture at room temperature in bond gaps up to 0.2 in (5 mm). It suits various substrates including most plastics, rubbers and metals. It is used where complete cure of excess adhesive as well as temperature and moisture resistance, is required. Best application results are achieved with LOCTITE® 10 ml Hybrid and Cyanoacrylate mixing nozzle (to suit HY 4070 and 3090).
- Gel consistency prevents adhesive flow, even on vertical surfaces.
- Gap filling up to 0.02 in (5 mm)
- Temperature and moisture resistance
Safety Data Sheet Loctite HY4070
Technical Data Sheet Loctite HY4070
||Bonding Plastic, Bonding Rubber, Construction, Direct Bonding, Edge Bonding, Interior Repairs, Structural Bonding
||Room Temperature (Ambient) Cure, Two Component Mix
|Fixture Time Temperature
|Full Cure Time
|Gap Fill (Maximum)
||10:1 (by volume)
|Number of Components
|Shear Strength Unit, Etched Aluminum
|Shear Strength Unit, Grit Blasted Steel
|Shear Strength, Etched Aluminum
|Shear Strength, Grit Blasted Steel
||Composite, Composite: Advanced Composites, Dry Surface, Elastomer: Highly Filled Elastomer, Epoxy, Fiberboard, Gel Coat, Laminate, Metal, Non-Gel Coat, Painted Surface, Phenolic, Plastic, Rubber, Thermoplastic, Thermoset, Urethane: Cast Urethane, Vinyl, Wood
||50000 mPa.s (cP) Brookfield